Overview of Tank Mix

1. New Application button - start a new application from this page.

2. Add Tank Mix section - fill out the values to start your tank mix. Create a tank mix for a crop before starting a new spray application. 

• Tank Mix Display Name - name your tank mix.
• Crop - enter the crop for which you will apply this tank mix.
• Application Method - select the method you plan to use to apply this tank mix. Choose from ground, air, or chemication. 
• Application Options - this selection changes the parameters of your application. Read more information about application options when adding a tank mix. 
• Interval - how often would you like to make this spray application?  For record-keeping purposes only. 

3. Tank Specifications section - enter this information manually or select a template created in application equipment to autofill these values. 

• Application Equipment Profile - select a template that has already been created in application equipment.
• Total Mixed Volume - the total amount of solution added to the tank.
• UOM (Unit of Measure) - select gallons from the dropdown. 

4. Application Specifications section - enter this information manually or select a template created in application equipment to autofill these values. 

• Amount of Mixture Applied - the spray rate or the amount of mixture applied per acre. This  determines how much of the total mixture will be applied by this equipment.
• UOM (Unit of Measure) - Select unit of measure per acre. Choose from gallon, fluid ounce, quart, or pint.
• Per Area - Select acre from the dropdown.

5. Add Product to Tank section - fill out required values to add more products to your tank mix. 

• Product - select the product to add to your tank mix.
• Applied Product Amount/ Applied Rate/ Added Product Amount - This value is determined by the Applications Options value.
• UOM (Unit of Measure) - Choose from fluid ounce, pint, quart, gallon, ounce, pound, gram, or ton. 
• Per Area Unit - defined by Application Options. 
  
  

6. Add button - click to add the product to your tank mix. 

7. Tank Products table - lists the products already added to the tank mix. 

9. Total Area Covered - shows the amount of acres covered with one tank of solution. 

8. Save button - click to save your tank mix. This mix is now ready for new applications in CropIQ 2.0.

For related information, read this article:

Add a Tank Mix
Add an Application Equipment